Development of a bipolar electrostatic chuck with a compliant beam-array assembly having four 3D-printed layers for large film handling

[1] Guo J, Tailor M, Bamber T, Chamberlain M, Justham L and Jackson M 2015 Investigation of relationship between interfacial electroadhesive force and surface texture J. Phys. D: Appl. Phys. 49 035303

[2] Asano K, Hatakeyama F and Yatsuzuka K 2002 Fundamental study of an electrostatic chuck for silicon wafer handling IEEE Trans. Ind. Appl. 38 840–5

[3] Nakamura T and Yamamoto A 2017 Modeling and control of electroadhesion force in DC voltage ROBOMECH Journal 4 1–10

[4] Yatsuzuka K, Hatakeyama F, Asano K and Aonuma S 2000 Fundamental characteristics of electrostatic wafer chuck with insulating sealant IEEE Trans. Ind. Appl. 36 510–6

[5] Qin S and McTeer A 2007 Wafer dependence of Johnsen–Rahbek type electrostatic chuck for semiconductor processes J. Appl. Phys. 102 064901

[6] Webb R C, Bonifas A P, Behnaz A, Zhang Y, Yu K J, Cheng H, Shi M, Bian Z, Liu Z and Kim Y-S 2013 Ultrathin conformal devices for precise and continuous thermal characterization of human skin Nat. Mater. 12 938–44

[7] Kang D, Pikhitsa P V, Choi Y W, Lee C, Shin S S, Piao L, Park B, Suh K-Y, Kim T-I and Choi M 2014 Ultrasensitive mechanical crackbased sensor inspired by the spider sensory system Nature 516 222

[8] Patel S, Park H, Bonato P, Chan L and Rodgers M 2012 A review of wearable sensors and systems with application in rehabilitation J. Neuroeng. Rehabil. 9 21

[9] Kudo H, Sawada T, Kazawa E, Yoshida H, Iwasaki Y and Mitsubayashi K 2006 A flexible and wearable glucose sensor based on functional polymers with Soft-MEMS techniques Biosens. Bioelectron. 22 558–62 Eng. Res. Express 4 (2022) 015010

[10] Brown E, Rodenberg N, Amend J, Mozeika A, Steltz E, Zakin M R, Lipson H and Jaeger H M 2010 Universal robotic gripper based on the jamming of granular material Proc. of The National Academy of Sciences 107 18809–14

[11] Amend J R, Brown E, Rodenberg N, Jaeger H M and Lipson H 2012 A positive pressure universal gripper based on the jamming of granular material IEEE Trans. Rob. 28 341–50

[12] Ilievski F, Mazzeo A D, Shepherd R F, Chen X and Whitesides G M 2011 Soft robotics for chemists Angew Chem. Int. Ed. 50 1890–5

[13] Hemthavy P, Kudo K and Kawano K 2020 Compliant bipolar electrostatic gripper using 3D-printed-layered elastic probes Eng. Res. Express 2 015013

[14] Dhelika R, Hemthavy P, Takahashi K and Saito S 2016 Compliant bipolar electrostatic gripper with micropillar electrodes array for manipulation at macroscale Smart Mater. Struct. 25 055037

[15] Choi S, Wakabayashi K, Takahashi K and Saito S 2018 Development of a bipolar electrostatic chuck module with a beam-array assembly using the multiple etching process Journal of Micromechanics and Microengineering 28 125011