[1] WHO regional office Europe, “WHO guidelines for indoor air quality: selected pollutants,” 2010.
[2] H. Suzuki, Nitrogen oxides encyclopedia (in Japanese). Japan: Maruzen Co.,Ltd., 2008.
[3] J. Ministry of the Environment, “Monitoring results of air poluutants(in Japanese),” 2020, [Online]. Available: http://www.env.go.jp/press/files/jp/113643.pdf.
[4] E. E. Agency, Air quality in Europe - 2020 report, no. No 09/2020. 2020.
[5] United States Environmental Protection Agency, “Nitrogen Dioxide trends.” https://www.epa.gov/air-trends/nitrogen-dioxide-trends (accessed Apr. 04, 2021).
[6] L. Nomura research institute, “Regulation trend of atmospheric environment in Chine and India (in Japanese).”
[7] P. Ielpo et al., “Outdoor spatial distribution and indoor levels of NO2 and SO2 in a high environmental risk site of the South Italy,” Sci. Total Environ., vol. 648, no. 2, pp. 787–797, 2019, doi: 10.1016/j.scitotenv.2018.08.159.
[8] T. Yang et al., “Source contribution analysis of tropospheric NO2 based on two- dimensional MAX-DOAS measurements,” Atmos. Environ., vol. 210, no. 2, pp. 186– 197, 2019, doi: 10.1016/j.atmosenv.2019.04.058.
[9] H. Takashima, H. Irie, Y. Kanaya, and H. Akimoto, “Enhanced NO2 at Okinawa Island, Japan caused by rapid air-mass transport from China as observed by MAX- DOAS,” Atmos. Environ., vol. 45, no. 15, pp. 2593–2597, 2011, doi: 10.1016/j.atmosenv.2010.10.055.
[10] L. Duque et al., “Evaluating strategies to reduce urban air pollution,” Atmos. Environ., vol. 127, no. February, pp. 196–204, 2016, doi: 10.1016/j.atmosenv.2015.12.043.
[11] Indian Economic Service, “Ambient Air Quality Srandards in India.” http://www.arthapedia.in/index.php?title=Ambient_Air_Quality_Standards_in_India #:~:text=National Ambient Air Quality Standards,of Pollution) Act%2C 1981. (accessed Apr. 04, 2021).
[12] United States Environmental Protection Agency, “NAAQS Table.” https://www.epa.gov/criteria-air-pollutants/naaqs-table (accessed Apr. 04, 2021).
[13] “ＧＢ3095－201 national standard: Ambient air quality standards,” 2016.
[14] Y. Yoda, H. Takagi, J. Wakamatu, N. Otani, and M. Shima, “Short-term effects of air pollutants on pulmonary function in adolescent with a history of asthma or allergies,” Allergies, vol. 64, no. 2, pp. 128–135, 2015.
[15] H. Khreis, C. Kelly, J. Tate, R. Parslow, K. Lucas, and M. Nieuwenhuijsen, “Exposure to traffic-related air pollution and risk of development of childhood asthma : A systematic review and meta-analysis,” Environ. Int., vol. 100, pp. 1–31, 2017, doi: 10.1016/j.envint.2016.11.012.
[16] E. NISHIKAWA, “NO2 pollution effect to asthma prevalence shown by Ministry of the Environment ‘Reports of environmental health surveillance for air pollution’and by citizens’ initiative ‘SORADASU,’” Ningen to kankyo, vol. 45, no. 2, pp. 12–25, 2019, doi: 10.5793/kankyo.45.2_12.
[17] J. J. K. Jaakkola, M. Paunio, M. Virtanen, and O. P. Heinonen, “Low-level air pollution and upper respiratory infections in children,” Am. J. Public Health, vol. 81, no. 8, pp. 1060–1063, 1991, doi: 10.2105/AJPH.81.8.1060.
[18] G. A. Network, The Global Asthma Report 2018. 2018.
[19] Ministry of Health Labour and Welfare, “Current status of the allergic disease in Japan (in Japanese),” 2016. https://www.mhlw.go.jp/file/05-Shingikai-10905100- Kenkoukyoku-Ganshippeitaisakuka/0000111693.pdf (accessed Apr. 06, 2021).
[20] S. Bashkova and T. J. Bandosz, “The effects of urea modification and heat treatment on the process of NO2 removal by wood-based activated carbon,” J. Colloid Interface Sci., vol. 333, no. 1, pp. 97–103, 2009, doi: 10.1016/j.jcis.2009.01.052.
[21] J. Kazmierczak, P. Nowicki, and R. Pietrzak, “Sorption properties of activated carbons obtained from corn cobs by chemical and physical activation,” Adsorption, vol. 19, pp. 273–281, 2013, doi: 10.1007/s10450-012-9450-y.
[22] J. M, T. V, B. J.F, and E. P, “Interaction mechanism of NO2 with carbon black: effect of surface oxygen complexes,” J. Anal. Appl. Pyrolysis, vol. 72, no. 1, pp. 171–181, 2004.
[23] X. Gao, S. Liu, Y. Zhang, Z. Luo, M. Ni, and K. Cen, “Adsorption and reduction of NO2 over activated carbon at low temperature,” Fuel Process. Technol., vol. 92, no. 1, pp. 139–146, 2011, doi: 10.1016/j.fuproc.2010.09.017.
[24] B. Meriem, J. Mejdi, L. Lionel, and A. Fatima, “Comparison of NO2 removal using date pits activated carbon and modified commercialized activated carbon via different preparation methods: Effect of porosity and surface chemistry,” Chem. Eng. J., vol. 253, no. 1, pp. 121–129, 2014.
[25] G. Imen, J. Mejdi, D. Sophie, L. Lionel, M. G. Camélia, and O. Abdelmottaleb, “Activated carbon prepared by physical activation of olive stones for the removal of NO2 at ambient temperature,” Comptes Rendus Chim., vol. 18, no. 1, pp. 63–74, 2015.
[26] F. Jacquot, V. Logie, J. F. Brilhac, and P. Gilot, “Kinetics of the oxidation of carbon black by NO2 influence of the presence of water and oxygen,” Carbon N. Y., vol. 40, no. 3, pp. 335–343, 2002, doi: 10.1016/S0008-6223(01)00103-8.
[27] P. Nowicki and R. Pietrzak, “Carbonaceous adsorbents prepared by physical activation of pine sawdust and their application for removal of NO2 in dry and wet conditions,” Bioresour. Technol., vol. 101, no. 15, pp. 5802–5807, 2010.
[28] R. Pietrzak, “Sawdust pellets from coniferous species as adsorbents for NO2 removal,” Bioresour. Technol., vol. 101, no. 3, pp. 907–913, 2010, doi: 10.1016/j.biortech.2009.09.017.
[29] K.-R. Justyna, G.-P. Barbara, N. Piotr, and P. Robert, “The use of microwave radiation for obtaining activated carbons from sawdust and their potential application in removal of NO2 and H2S,” Chem. Eng. J., vol. 269, no. 1, pp. 352–358, 2015.
[30] J. Che-ChinYu, V.-H. Nguyen, J. Lasek, and J. C.S.Wu, “Titania nanosheet photocatalysts with dominantly exposed (001) reactive facets for photocatalytic NOx abatement,” Appl. Catal. B Environ., vol. 219, pp. 391–400, 2017.
[31] N. Nhat Huy and B. Hsunling, “Photocatalytic removal of NO and NO2 using titania nanotubes synthesized by hydrothermal method,” J. Environ. Sci., vol. 26, no. 5, pp. 1180–1187, 2014.
[32] Y. Murata, “Air purification by photocatalytic concrete (in Japanese),” Concr. J., vol. 45, no. 5, pp. 131–135, 2007.
[33] Y. Murata, “The technology of NOx removal from air using photocatalysts (in Japanese),” J. Soc. Inorg. Mater., vol. 7, pp. 323–330, 2000.
[34] G. Hüsken, M. Hunger, and H. J. H. Brouwers, “Experimental study of photocatalytic concrete products for air purification,” Build. Environ., vol. 44, pp. 2463–2474, 2009.
[35] T. Fukumura, H. Tokushige, and M. Kawakami, “Physical properties and NOx remediation of cement mortar incorporating titanium dioxide powder (in Japanese),” J. Soc. Mater. Sci. Japan, vol. 55, no. 10, pp. 923–928, 2006.
[36] L. Yang, A. Hakki, F. Wang, and D. E. Macphee, “Photocatalyst efficiencies in concrete technology: The effect of photocatalyst placement,” Appl. Catal. B Environ., vol. 222, no. October 2017, pp. 200–208, 2018, doi: 10.1016/j.apcatb.2017.10.013.
[37] M. Kitano, M. Matsuoka, M. Ueshima, and M. Anpo, “Recent developments in titanium oxide-based photocatalysts,” Appl. Catal. A Gen., vol. 325, no. 1, pp. 1–14, 2007, doi: 10.1016/j.apcata.2007.03.013.
[38] J. C. Murillo-Sierra, A. Hernández-Ramírez, L. Hinojosa-Reyes, and J. L. Guzmán- Mar, “A review on the development of visible light-responsive WO3-based photocatalysts for environmental applications,” Chem. Eng. J. Adv., vol. 5, p. 100070, 2021, doi: 10.1016/j.ceja.2020.100070.
[39] A. Sato, K. Yoshida, D. Fukushi, T. Rokutanda, and M. Esaki, “WO3 visible-light-responding photocatalyst to achieve a comfortable indoor environment (in Japanese),” Nihongazougakkaishi, vol. 55, no. 4, pp. 449–454, 2016.
[40] T. Ohira, “Improvement of Air Quality by Essential Oils from Woody Plants,” Mokuzai Gakkaishi, vol. 61, no. 3. pp. 226–231, 2015, doi: 10.2488/jwrs.61.226.
[41] T. Ohira, “Removal of nitorogen dioxide using woody plant constituents,” AROMA Res., vol. 15, no. 2, pp. 62–69, 2014.
[42] M. M. Ballari, Q. L. Yu, and H. J. H. Brouwers, “Experimental study of the NO and NO2 degradation by photocatalytically active concrete,” Catal. Today, vol. 161, no. 1, pp. 175–180, 2011, doi: 10.1016/j.cattod.2010.09.028.
[43] Y. Tsujino, M. Warashina, J. Morioka, N. Takenaka, H. Bandow, and Y. Maeda, “Wooden Materials Suitable for Storage Boxes of Cellar Walls to Remove Nitrogen Dioxide and Ozone in Ambient Air,” Global Environ. Res., vol. 4, no. 1. pp. 89–94, 2000.
[44] I. Abe, S. Iwasaki, Y. Iwata, H. Kominami, and Y. Kera, “Relationship between production method and adsorption property of charcoal,” Tanso, no. 185, pp. 277– 284, 1998.
[45] Forestry Agency, Ministry of Agriculture, and F. and F. G. of Japan, “Annual report on forest and forestry in Japan (in Japanese),” 2020.
[46] Y. Ishimaru, Y. Furuta, and M. Sugiyama, Wood science series 3: physics of wood. 2017.
[47] Y. Ueda, “Holocene fossil wood assemblages and wooden artifacts in the lowland along the Wakasa bay （Environment and Human Activities in the Island Arc） (in Japanese),” Bull. Natl. Museum Japanese Hist., vol. 81, pp. 387–397, 1990.
[48] Y. Hayashi, Useful tree illustration: wood edition (in Japanese). Tokyo, Japan: Seibundo-seikousya, 1969.
[49] M. Suzuki and S. Noshiro, “Forest Vegetation and Utilization of Wood during the Jomon Period in Japan (in Japanese),” Quat. Res., vol. 36, no. 5, pp. 329–342, 1997, doi: 10.4116/jaqua.36.329.
[50] Y. Tsujino et al., “Convenient method for monitoring carboxylic acid and aspects of its concentration in wooden storage cellars at museum,” Bull Nat Museum Jpn Hist., vol. 97, pp. 29–42, 2002.
[51] Y. Tsujino, T. Nishimura, H. Matsubara, N. Takenaka, and H. Ogawa, “NO2 purification and creation of the reducing atmosphere on the wood surface (in Japanese).,” Env. info Cent Osaka Prefect, no. 23, pp. 49–55, 2003.
[52] S. Kawai, Y. Tsujino, S. Fujita, and A. Yamamoto, “Humidity control and air purification with wood (in Japanese),” Clean technol., vol. 7, pp. 1–4, 2010.
[53] Y. Tsujino, “Purification ability of nitrogen dioxide, ozone and formaldehyde on the edge of Sugi wood. (in Japanese),” J. Japan Assoc. odor Environ., vol. 42, no. 1, pp. 8–16, 2011.
[54] Y. Tsujino and H. Imura, “practical experiment of NOx removal on cedar sawdust (in Japanese),” 2004.
[55] Y. Tsujino, M. Warashima, J. Morioka, N. Takenaka, H. Bandow, and Y. Maeda, “Wooden materials suitable for storage boxes or cellar walls to remove nitrogen dioxide and ozone in ambient air,” Glob Env. Res, vol. 4, no. 1, pp. 89–94, 2000.
[56] Japanese Industrial Standards, “JIS R 1701-1 Fine ceramics (advanced ceramics, advanced technical ceramics)—test method for air purification performance of photocatalytic materials-part 1 removal of nitric oxide (in Japanese),” 2016.
[57] A. Mosca, O. Ohrman, J. Hedlund, I. Perdana, and D. Creaser, “NO2 and N2 sorption in MFI films with varying Si/AL and Na/AL ratios.,” Micropor Mesopor Mater., vol. 120, no. 3, pp. 195–205, 2009.
[58] A. L. Goodman, G. M. Underwood, and V. H. Grassian, “Heterogeneous Reaction of NC2: Characterization of Gas-Phase and Adsorbed Products from the Reaction, 2NO2(g) + H2O(a) → HONO(g) + HNO3(a) on Hydrated Silica Particles,” J. Phys. Chem. A, vol. 103, no. 36, pp. 7217–7223, 1999, doi: 10.1021/jp9910688.
[59] P. Nowicki, H. Wachowska, and R. Pietrzak, “Active carbons prepared by chemical activation of plum stones and their application in removal of NO2,” J. Hazard. Mater., vol. 181, no. 1–3, pp. 1088–1094, 2010.
[60] S. Kasaoka, T. Kosakam, Y. Hara, and E. Sasaoka, “Adsorption of mixture of nitrogen oxide and sulfur oxide on activated carbon (in Japanese),” Nihon kagakukaishi, vol. 11, pp. 1737–1741, 1977.
[61] M. Jeguirim, V. Tschamber, J. F. Brilhac, and P. Ehrburger, “Oxidation mechanism of carbon black by NO2: Effect of water vapour,” Fuel, vol. 84, no. 14–15, pp. 1949– 1956, 2005, doi: 10.1016/j.fuel.2005.03.026.
[62] N. Shirahama et al., “Mechanistic study on adsorption and reduction of NO2 over activated carbon fibers,” Carbon N. Y., vol. 40, no. 14, pp. 2605–2611, 2002, doi: 10.1016/S0008-6223(02)00190-2.
[63] K. Kante, E. Deliyanni, and T. J. Bandosz, “Interactions of NO2 with activated carbons modified with cerium, lanthanum and sodium chlorides,” J. Hazard. Mater., vol. 165, no. 1–3, pp. 704–713, 2009, doi: 10.1016/j.jhazmat.2008.10.092.
[64] I. Masuda and M. Tamaki, “Behavior of nitrgen oxide in air (in Japanese),” Kankyou gijutsu, vol. 1, no. 5, pp. 350–354, 1972.
[65] T. Kagiya, T. Ogita, and H. Hatta, “Oxidation and reduction of nitrogen oxides in air (4): Photo chemical change of NO in air under mercury lamp irradiation (in Japanese),” Kankyou gijutsu, vol. 8, no. 3, pp. 306–311, 1979.
[66] O. Sawabe, K. Mori, and T. Takeuchi, “Micro-pore structure in cell wall of wood (in Japanese),” Mokuzai Gakkaishi, vol. 19, no. 2, pp. 55–62, 1973.
[67] M. Hasegawa, M. Takata, J. Matsumura, and K. Oda, “Effect of wood properties on within-tree variation in ultrasonic wave velocity in softwood,” Ultrasonics, vol. 51, no. 3, pp. 296–302, 2011, doi: 10.1016/j.ultras.2010.10.001.
[68] F. Ishiguri, S. Kasai, S. Yokota, K. Iizuka, and N. Yoshizawa, “Wood quality of sugi (Cryptomeria japonica) grown at four initial spacings,” IAWA J., vol. 26, no. 3, pp. 375–386, 2005.
[69] T. Tanaka, Y. Kawai, M. Sadanari, S. Shida, and T. Tsuchimoto, “Air permeability of sugi (Cryptomeria japonica) wood in the three directions,” Maderas Cienc. y Tecnol., vol. 17, no. 1, pp. 17–28, 2015, doi: 10.4067/S0718-221X2015005000002.
[70] K. Urano, N. Tanikawa, T. Masuda, and Y. Kobayashi, “Adsorption of nitrogen dioxide on activated carbon (in Japanese),” Nihon kagakukaishi, vol. 1, pp. 124–131, 1977.
[71] H. Kano, S. Shibutani, K. Hayashi, Y. Iijima, and S. Doi, “Effect of High- Temperature Drying Processes on Termite Resistance of Sugi (Cryptomeria japonica) Heartwood (in Japanese),” Mokuzai Gakkaishi, vol. 50, no. 2, pp. 91–98, 2004.
[72] S. SHIBUTANI, E. OBATAYA, K. HANATA, and S. DOI, “Quantitative changes of sugi (Cryptomeria japonica) heartwood extractives by a high-temperature drying process (in Japanese),” Wood Preserv., vol. 32, no. 5, pp. 196–202, 2006, doi: 10.5990/jwpa.32.196.
[73] T. Okuda et al., “Effect of heat drying treatment on extracts of Sugi (Cryptomeria japonica) board: Quantitative change of terpenes by moderate-temperature drying treatments (in Japanese),” mokuzai, vol. 63, no. 5, pp. 204–213, 2017.
[74] R. Perng Wu and T. Tajima, “Infuence of drying on chemical properties of wood. I. Effect of drying on chemical composition of wood. (in Japanese),” Mokuzai Gakkaishi, vol. 15, pp. 203–207, 1969.
[75] K. Kojiro, Y. Furuta, and Y. Ishimaru, “Influence of heating and drying history on micropores in dry wood,” J. Wood Sci., vol. 54, no. 3, pp. 202–207, 2008, doi: 10.1007/s10086-007-0943-3.
[76] K. Toba, T. Nakai, H. Yamamoto, M. Yoshida, and N. Nishio, “Effects of repeated wet-and-dry treatments on water and gas adsorption performance of wood (in Japanese),” Mokuzai Gakkaishi, vol. 59, no. 6, pp. 334–338, 2013.
[77] T. Nakatani and K. Kojiro, “Micropore structure of wood,” Wood inductry, vol. 66, no. 6, pp. 240–245, 2011.
[78] S. S. Cheng, H. Y. Lin, and S. T. Chang, “Chemical composition and antifungal activity of essential oils from different tissues of Japanese cedar (Cryptomeria japonica),” J. Agric. Food Chem., vol. 53, no. 3, pp. 614–619, 2005, doi: 10.1021/jf0484529.
[79] J. Miyakoshi, E. Matsubara, E. Narita, S. Koyama, Y. Shimizu, and S. Kawai, “Suppressive effects of extract of cedar wood on heat-induced expression of cellular heat shock protein,” Yakugaku Zasshi, vol. 138, no. 1, pp. 97–106, 2018, doi: 10.1248/yakushi.17-00165.
[80] T. Ohira, B. J. Park, Y. Kurosumi, and Y. Miyazaki, “Evaluation of dried-wood odors: Comparison between analytical and sensory data on odors from dried sugi (Cryptomeria japonica) wood,” J. Wood Sci., vol. 55, no. 2, pp. 144–148, 2009, doi: 10.1007/s10086-008-1001-5.
[81] T. Ohira, “Efficient utilization of condensed water discharged from wood-drying processes. (in Japanese),” J Jpn Assoc Odor Env., vol. 40, no. 6, pp. 400–411, 2009.
[82] K. Azuma et al., “Effects of inhalation of emissions from cedar timber on psychological and physiological factors in an indoor environment,” Environ. - MDPI, vol. 3, no. 37, pp. 1–13, 2016, doi: 10.3390/environments3040037.
[83] M. Fukuyama, “Wood and water. (in Japanese),” Zairyou, vol. 28, no. 311, pp. 102– 108, 1979.
[84] P. Nowicki, H. Wachowska, and R. Pietrzak, “Active carbons prepared by chemical activation of plum stones and their application in removal of NO2,” J. Hazard. Mater., vol. 181, no. 1–3, pp. 1088–1094, 2010.
[85] Japanese Industrial Standards, “JIS B 7920 Hygrometers−Test method,” 2000.
[86] E. OBATAYA and M. Norimoto, “Acoustic property of cane (Arundo donax L.) Used for reeds of woodwind instruments I: The relationships between vibrational properties and moisture contents of cane. (in Japanese),” Mokuzai Gakkaishi, vol. 41, no. 3, pp. 289–292, 1995.
[87] E. Matsubara and S. Kawai, “VOCs emitted from Japanese cedar (Cryptomeria japonica) interior walls induce physiological relaxation,” Build. Environ., vol. 72, pp. 125–130, 2014, doi: 10.1016/j.buildenv.2013.10.023.
論文の公開元へ
