Agresti, G., Bonifazi, G., Calienno, L., Capobianco, G., Lo Monaco, A., Pelosi, C., Picchio, R., and Serranti, S. (2013). Surface investigation of photo-degraded wood by colour monitoring, infrared spectroscopy, and hyperspectral imaging. J. Spectrosc. 2013: 1–13.
Awais, M., Altgen, M., Mäkelä, M., Altgen, D., and Rautkari, L. (2020). Hyperspectral near-infrared image assessment of surface- acetylated solid wood. ACS Appl. Bio Mater. 3: 5223–5232.
Ball, R.D., Simpson, I.G., and Pang, S. (2001). Measurement, modelling and prediction of equilibrium moisture content in Pinus radiata heartwood and sapwood. Holz als Roh-Werkst. 59: 457–462.
Bonifazi, G., Serranti, S., Capobianco, G., Agresti, G., Calienno, L., Picchio, R., Lo Monaco, A., Santamaria, U., and Pelosi, C. (2016). Hyperspectral imaging as a technique for investigating the effect of consolidating materials on wood. J. Electron. Imaging 26: 011003.
Brodersen, C.R. and McElrone, A.J. (2013). Maintenance of xylem network transport capacity: a review of embolism repair in vascular plants. Front. Plant Sci. 4: 1–11.
Burger, J. and Geladi, P. (2006). Hyperspectral NIR imaging for calibration and prediction: a comparison between image and spectrometer data for studying organic and biological samples. Analyst 131: 1152–1160.
Dahlen, J., Diaz, I., Schimleck, L., and Jones, P.D. (2017). Near-infrared spectroscopy prediction of southern pine No. 2 lumber physical and mechanical properties. Wood Sci. Technol. 51: 309–322.
Fernandes, A., Lousada, J., Morais, J., Xavier, J., Pereira, J., and Melo- Pinto, P. (2013). Measurement of intra-ring wood density by means of imaging VIS/NIR spectroscopy (hyperspectral imaging). Holzforschung 67: 59–65.
Fujimoto, T., Yamamoto, H., and Tsuchikawa, S. (2007). Estimation of wood stiffness and strength properties of hybrid larch by near- infrared spectroscopy. Appl. Spectrosc. 61: 882–888.
Fujimoto, T., Kurata, Y., Matsumoto, K., and Tsuchikawa, S. (2008). Application of near infrared spectroscopy for estimating wood mechanical properties of small clear and full length lumber specimens. J. Near Infrared Spectrosc. 16: 529–537.
Fujimoto, T., Kurata, Y., Matsumoto, K., and Tsuchikawa, S. (2010). Feasibility of near-infrared spectroscopy for online multiple trait assessment of sawn lumber. Appl. Spectrosc. 64: 92–99.
Fujimoto, T., Numa, T., Kobori, H., and Tsuchikawa, S. (2015).
Visualisation of spatial distribution of moisture content and basic density using near-infrared hyperspectral imaging method in sugi (Cryptomeria japonica). Int. Wood Prod. J. 6: 46–48.
Gartner, B.L. (2005). Assessing wood characteristics and wood quality in intensively managed plantations. J. For. 103: 75–77.
Goyaghaj, A.H. (2009). Using hyperspectral images to map moisture content and basic density of boards and frozen and thawed logs, Ph.D. thesis. University of New Brunswick, Canada.
Haddadi, A., Burger, J., Leblon, B., Pirouz, Z., Groves, K., and Nader, J. (2015a). Using near-infrared hyperspectral images on subalpine fir board. Part 1: moisture content estimation. Wood Mater. Sci. Eng. 10: 27–40.
Haddadi, A., Leblon, B., Burger, J., Pirouz, Z., Groves, K., and Nader, J. (2015b). Using near-infrared hyperspectral images on subalpine fir board. Part 2: density and basic specific gravity estimation. Wood Mater. Sci. Eng. 10: 41–56.
Hauksson, J.B., Bergqvist, G., Bergsten, U., Sjöström, M., and Edlund, U. (2001). Prediction of basic wood properties for Norway spruce. Interpretation of near infrared spectroscopy data using partial least squares regression. Wood Sci. Technol. 35: 475–485.
Hein, P.R.G., Pakkanen, H.K., and Dos Santos, A.A. (2017). Challenges in the use of near infrared spectroscopy for improving wood quality: a review. For. Syst 26: 1–10.
Hernández, R.E. (2007). Moisture sorption properties of hardwoods as affected by their extraneous substances, wood density, and interlocked grain. Wood Fiber Sci. 39: 132–145.
Inagaki, T., Schwanninger, M., Kato, R., Kurata, Y., Thanapase, W., Puthson, P., and Tsuchikawa, S. (2012). Eucalyptus camaldulensis density and fiber length estimated by near- infrared spectroscopy. Wood Sci. Technol. 46: 143–155.
Ishiguri, F., Hiraiwa, T., Iizuka, K., Yokota, S., Priadi, D., Sumiasri, N., and Yoshizawa, N. (2012). Radial variation in microfibril angle and compression properties of Paraserianthes Falcataria planted in Indonesia. IAWA J. 33: 15–23.
ISO (International standard organization) (2014a). Physical and mechanical properties of wood - Test methods for small clear wood specimens - Part 3: Determination of ultimate strength in static bending (ISO 13061-3), ISO, Geneva, Switzerland.
ISO (International standard organization) (2014b). Physical and mechanical properties of wood - Test methods for small clear wood specimens - Part 4: Determination of modulus of elasticity in static bending (ISO 13061-4), ISO, Geneva, Switzerland.
ISO (International standard organization) (2017). Physical and mechanical properties of wood - Test methods for small clear wood specimens - Part 17: Determination of ultimate stress in compression parallel to grain (ISO 13061-17). ISO, Geneva, Switzerland.
Jankowska, A., Drozdzek, M., Sarnowski, P., and Horodenski, J. (2017). Effect of extractives on the equilibrium moisture content and shrinkage of selected tropical wood species. Bio Res. 12: 597–607.
Kelley, S.S., Rials, T.G., Groom, L.R., and So, C.L. (2004a). Use of near infrared spectroscopy to predict the mechanical properties of six softwoods. Holzforschung 58: 252–260.
Kelley, S.S., Rials, T.G., Snell, R., Groom, L.H., and Sluiter, A. (2004b). Use of near infrared spectroscopy to measure the chemical and mechanical properties of solid wood. Wood Sci. Technol. 38: 257–276.
Kha, L.D., Harwood, C.E., Kien, N.D., Baltunis, B.S., Hai, N.D., and Thinh, H.H. (2012). Growth and wood basic density of acacia hybrid clones at three locations in Vietnam. New For. 43: 13–29.
Kobori, H., Gorretta, N., Rabatel, G., Bellon-Maurel, V., Chaix, G., Roger, J.M., and Tsuchikawa, S. (2013). Applicability of Vis-NIR hyperspectral imaging for monitoring wood moisture content (MC). Holzforschung 67: 307–314.
Kobori, H., Inagaki, T., Fujimoto, T., Okura, T., and Tsuchikawa, S. (2015). Fast online NIR technique to predict MOE and moisture content of sawn lumber. Holzforschung 69: 329–335.
Kojima, M., Yamamoto, H., Yoshida, M., Ojio, Y., and Okumura, K. (2009). Maturation property of fast-growing hardwood plantation species: a view of fiber length. For. Ecol. Manage. 257: 15–22.
Ma, T., Inagaki, T., and Tsuchikawa, S. (2017). Calibration of SilviScan data of Cryptomeria japonica wood concerning density and microfibril angles with NIR hyperspectral imaging with high spatial resolution. Holzforschung 71: 341–347.
Ma, T., Schajer, G., Inagaki, T., Pirouz, Z., and Tsuchikawa, S. (2018). Optical characteristics of Douglas fir at various densities, grain directions and thicknesses investigated by near-infrared spatially resolved spectroscopy (NIR-SRS). Holzforschung 72: 789–796.
Ma, T., Inagaki, T., Ban, M., and Tsuchikawa, S. (2019). Rapid identification of wood species by near-infrared spatially resolved spectroscopy (NIR-SRS) based on hyperspectral imaging (HSI). Holzforschung 73: 323–330.
Ma, T., Inagaki, T., and Tsuchikawa, S. (2020a). Rapidly visualizing the dynamic state of free, weakly, and strongly hydrogen-bonded water with lignocellulosic material during drying by near-infrared hyperspectral imaging. Cellulose 27: 4857–4869.
Ma, T., Schimleck, L., Inagaki, T., and Tsuchikawa, S. (2020b). Rapid and nondestructive evaluation of hygroscopic behavior changes of thermally modified softwood and hardwood samples using near-infrared hyperspectral imaging (NIR-HSI). Holzforschung 75: 345–357.
Meder, R. (2015). The magnitude of tree breeding and the role of near infrared spectroscopy. NIR News 26: 8–10.
Meder, R., Brawner, J.T., Downes, G.M., and Ebdon, N. (2011). Towards the in-forest assessment of Kraft pulp yield: comparing the performance of laboratory and hand-held instruments and their value in screening breeding trials. J. Near Infrared Spectrosc. 19: 421–429.
Minasny, B. and McBratney, A. (2013). Why you don’t need to use RPD. Pedometron 33: 14–15.
Moore, J.R. and Cown, D.J. (2017). Corewood (Juvenile Wood) and its impact on wood utilisation. Curr. For. Rep. 3: 107–118.
Mora, C.R., Schimleck, L.R., Clark, A., and Daniels, R.F. (2011a). Determination of basic density and moisture content of merchantable loblolly pine logs by near infrared spectroscopy. J. Near Infrared Spectrosc. 19: 391–399.
Mora, C.R., Schimleck, L.R., Yoon, S.C., and Thai, C.N. (2011b). Determination of basic density and moisture content of loblolly pine wood disks using a near infrared hyperspectral imaging system. J. Near Infrared Spectrosc. 19: 401–409.
Morris, H., Plavcová, L., Cvecko, P., Fichtler, E., Gillingham, M.A.F., Martínez-Cabrera, H.I., Mcglinn, D.J., Wheeler, E., Zheng, J., Ziemińska, K., et al (2016). A global analysis of parenchyma tissue fractions in secondary xylem of seed plants. New Phytol. 209: 1553–65.
Payn, T., Carnus, J.M., Freer-Smith, P., Kimberley, M., Kollert, W., Liu, S., Orazio, C., Rodriguez, L., Silva, L.N., and Wingfield, M.J. (2015). Changes in planted forests and future global implications. For. Ecol. Manage. 352: 57–67.
Phuc, T.X., Cam, C.T., and Huy, T. Le (2020). Vietnam wood and wood products export and import in 2019 (in Vietnamese), Hanoi, Vietnam.
Ruano, A., Zitek, A., Hinterstoisser, B., and Hermoso, E. (2019). NIR hyperspectral imaging (NIR-HI) and μxRD for determination of the transition between juvenile and mature wood of Pinus sylvestris L. Holzforschung 73: 621–627.
Rungwattana, K. and Hietz, P. (2018). Radial variation of wood functional traits reflect size-related adaptations of tree mechanics and hydraulics. Funct. Ecol. 32: 260–272.
Schimleck, L., Antony, F., Mora, C., and Dahlen, J. (2018a). Comparison of whole-treewood property maps for 13- and 22-year-old loblolly pine. Forests 9: 1–11.
Schimleck, L., Dahlen, J., Yoon, S.C., Lawrence, K.C., and Jones, P.D. (2018b). Prediction of Douglas-fir lumber properties: comparison between a benchtop near-infrared spectrometer and hyperspectral imaging system. Appl. Sci. 8: 1–17.
Schimleck, L., Dahlen, J., Apiolaza, L.A., Downes, G., Emms, G., Evans, R., Moore, J., Pâques, L., Van den Bulcke, J., and Wang, X. (2019). Non-destructive evaluation techniques and what they tell us about wood property variation. Forests 10: 728.
Schimleck, L.R., Antony, F., Mora, C., and Dahlen, J. (2020). Whole-tree tracheid property maps for loblolly pine at different ages. Wood Sci. Technol. 54: 683–701.
Sein, C.C. (2012). Growthandsiteconditionof Acaciamangium, Acacia hybrid, Eucalyptus urophylla, Cinnamomum parthenoxylon and Erythropholeum fordii for livelihood security of smallholders in industrial tree plantingprogramsof Vietnam, Ph.D. thesis. Georg August University of Gottingen, Gottingen, Germany.
Shwanninger, M., Rodrigues, J.C., and Fackler, K. (2011). A review of band assignments in near infrared spectra of wood and wood components. J. Near Infrared Spectrosc. 19: 287–308.
Sivertsen, M.S. and Vestøl, G.I. (2010). Liquid water absorption in uncoated Norway spruce (Picea abies) claddings as affected by origin and wood properties. Wood Mater. Sci. Eng. 5: 181–193.
Sjökvist, T., Niklewski, J., and Blom, A. (2019). Effect of wood density and cracks on the moisture content of coated Norway spruce (Picea abies (L.) Karst.). Wood Fiber Sci. 51: 160–172.
Sofianto, I.A., Inagaki, T., Ma, T., and Tsuchikawa, S. (2018). Effect of knots and holes on the modulus of elasticity prediction and mapping of sugi (Cryptomeria japonica) veneer using near- infrared hyperspectral imaging (NIR-HSI). Holzforschung 73: 259–268.
Talbert, C. and Marshall, D. (2005). Plantation productivity in the Douglas-fir region under intensive silvicultural practices: results from research and operations. J. For. 103: 65–70.
Thumm, A., Riddell, M., Nanayakkara, B., Harrington, J., and Meder, R. (2010). Near infrared hyperspectral imaging applied to mapping chemical composition in wood samples. J. Near Infrared Spectrosc. 18: 507–515.
Thumm, A., Riddell, M., Nanayakkara, B., Harrington, J., and Meder, R. (2016). Mapping within-stem variation of chemical composition by near infrared hyperspectral imaging. J. Near Infrared Spectrosc. 24: 605–616.
Tsuchikawa, S. and Schwanninger, M. (2013). A review of recent near- infrared research for wood and paper (Part 2). Appl. Spectrosc. Rev. 48: 560–587.
Tsuchikawa, S. and Kobori, H. (2015). A review of recent application of near infrared spectroscopy to wood science and technology. J. Wood Sci. 61: 213–220.
Viet, D.D., Ma, T., Inagaki, T., Kim, N.T., Chi, N.Q., and Tsuchikawa, S. (2020). Physical and mechanical properties of fast growing polyploid acacia hybrids (A. auriculiformis x A. mangium) from Vietnam. Forests 11: 1–15.
Vikram, V., Cherry, M.L., Briggs, D., Cress, D.W., Evans, R., and Howe, G.T. (2011). Stiffness of douglas-fir lumber: effects of wood properties and genetics. Can. J. For. Res. 41: 1160–1173.
論文の公開元へ
